Cameo ROOT PAR TW Manual De Usuario página 6

12
5 FUSE
Fuse holder for 5 × 20 mm micro fuses. IMPORTANT NOTE: Only replace the fuse with a fuse of the same type and values. If a fuse trips
repeatedly, please contact an authorized service center.
OLED DISPLAY
6
The OLED display shows the currently active operating mode (main display), the menu options in the Options menu, and the numerical
values or operating status for certain menu options. If there is no input within approx. two minutes, the display automatically switches to the
main display. Note on the main display in operating modes with external control: As soon as the control signal is interrupted, the symbols on
the display will begin to flash. When the control signal is present again, the flashing will stop. Starting from the main display, briefly press
UP to rotate the display 180°.
CONTROL KEYS
7
MODE – you can access the options menu by pressing MODE. Pressing it again will return you to the main display. If you press MODE
without having first pressed ENTER to confirm a value or status change, the previously confirmed value or status shall be restored.
ENTER – pressing ENTER takes you to the menu level, on which value changes can be made, and you can reach the submenu using ENTER.
Value or status adjustments can also by confirmed by pressing ENTER.
UP and DOWN – selects the individual menu options in the selection menu (DMX address, operating mode, etc.) and in the submenus.
Allows you to change the value of a menu option (e.g., DMX address) as desired.
MIC
8
Microphone for music control mode.
9 TILT
Knurled screw for tilting when used as uplight. The twin mounting bracket can be removed for a more subtle look.
10 RUBBER FEET
Four rubber feet for stability.
SAFETY EYEBOLT
11
Safety eyebolt for securing the spotlight on crossbeam installations.
HANDLE SCREWS
12
The two handle screws are used to adjust and fix the stand or mounting bracket.
PORT FOR W-DMX™ CONNECTION
The USB-A connector for the optional iDMX stick is located on the side of the spotlight opposite the connection panel.
6
9
10
ROOT PAR TW
6
7
10
10
8
MIC
5
FUSE: F3A / 250 V
11
10
12