Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
STORE POWER TOOLS.
Store power tools out of reach of children and
not allow the handling of power tools to people
unfamiliar with the tools or these instructions.
Power tools are dangerous in the hands of
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions that
may affect the operation of power tools. Power tools
are repaired before use when they are damaged.
Many accidents are caused by poorly maintained
power tools. Use power tools, accessories and
tool tips, etc. according to these instructions and
in the manner provided for the particular type of
power tool, taking into account the conditions work
and work to develop. The use of the power tool for
applications other than those intended could result
in a dangerous situation. Please check your power
tool serviced by a Werku
using only identical replacement parts. This will
ensure the safety of the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
SANDER.
Make sure that all the screws in the sander are
perfectly tightened. In cold climates or when the
sander has not been used for a period, allow the
sander to warm up by leaving it to run empty for a
few minutes, to ensure that all internal components
are perfectly lubricated. Make sure that the possible
installed accessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the sander is firmly supported before
using. Check that no one is standing beneath you
when using the sander in high areas. Keep your
hands away from all moving parts of the sander.
DURING THE OPERATION.
Do not leave the sander operating without having it
firmly fixed. Only turn it on when you are sure you
have full control over it. Do not point the sander at
anyone while in use. When operating the sander will
produce vibrations. The screws may gradually come
loose, and possibly cause faults or accidents. Keep
your hands away from all moving parts of the sander.
AT FINISH WORKING.
Do not touch the possible accessories installed
in the sander after use. It may be hot and cause
official repair service
®
English
burns. Some materials worked with may contain
chemicals or toxic components. Avoid inhaling
these substances or allowing them to come into
contact with your skin. Use PPE designed to
prevent and protect against incidents of this kind.
OTHER SAFETY INSTRUCTIONS.
1) Maintain a firm grip on this power tool and
position your body and arm to allow you to resist
kickback forces. Always use auxiliary handle,
if provided, for maximum control over kickback
or torque reaction during start-up. The operator
can control torque reactions or kickback forces, if
proper precautions are taken. 2) Do not position
your body in the area where this power tool will
move if kickback occurs. 3) Use special care
when working corners, sharp edges etc. 4) Do not
use excessively oversized sanding paper. Follow
the ecommendations of Werku, when selecting
sanding paper. Larger sanding paper extending
beyond the sanding pad presents a laceration
hazard and may cause snagging, tearing of the
disc or kickback.
DESCRIPTION OF THE PRODUCT.
The sander has been designed to carry out jobs of
polishing and sanding. Refer to this plan to familiarize
yourself with the sander before use.
6
4
5
1. Switch.
2. Handle.
3. Dust collector.
4. Speed control.
5. Base.
6. Auxiliary handle.
7. Clamp lever.
USE INSTRUCTIONS.
Before starting up the sander, we recommend
that you carefully read all of the instructions as
4
1
2
3
7
