Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation and Wiring
Brackets Installation
Note: Before installation, please ensure the device is disconnected from the
power source.
Steps to install the device in a suitable location:
1.
Attach the installation bracket to the enclosure using the screws that
were provided in the package separately.
2.
The bracket is attached to the enclosure as shown.
3.
Repeat steps from 1 to 2 for the other side of the transmitter.
4.
Attach the brackets to the surface you want to hold the transmitter
against using the screws (provided by others).
5.
Repeat steps from 1 to 4 to install the receiver.
Wiring
Warnings:
Before wiring, disconnect the power from the device.
During wiring, connect and disconnect the cables gently.
Steps for device wiring:
1.
Connect an HDMI source (such as Blu-ray player) to HDMI IN port of the
transmitter.
For more information please call 1-833-574-9124 or email [email protected]
8
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Tabla de contenido
