Mixcder ShareMe Pro Manual De Usuario página 9

All manuals and user guides at all-guides.com
Answer a call*
Reject a call*
End a call*
Redial the last number* Press and hold the power button for 2 seconds
The "*" is available to the primary headphone with enabled ShareMe
function.
Note:
- ShareMe Pro will pair with the last paired device automati-
cally when turned on. But for some computers or laptops you
will need to manually pair every time.
- There will be a alert tone when the volume reaches the
minimum or maximum level.
- The microphone can't work when using a wired headphone.
11. Troubleshooting
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery and try
again. Refer to chapter 4. Charging the Battery.
Q: Why doesn't the headphone pair with the mobile phone?
A: Please check the followings.
- Check that the headphone is charged and is in pairing mode.
- Make sure that the mobile phone's wireless function is on.
- Make sure the two devices are in the effective pairing range.
(10 meters). If use ShareMe function, make sure two
headphones are within 5 meters.
- Make sure that there is no obstacle between the headphone
and the mobile phone, such as electronic equipment and a
wall.
- Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to obstacles
between the headphone and the pairing device. Please make
sure that there is no obstacle between the two devices and is
The LED flashes red twice every second and
press the power button to answer the call. Then
the LED flashes blue twice every second.
Press and hold the power button for 2 seconds
Press the power button
EN-8