Tabla de contenido
Idiomas disponibles
Idiomas disponibles
When using your dryer, please pay attention to whether or not the
fabrics can be tumble dried and to the following symbols which may
be present on your clothes:
Tumble dry
Dry
Line dry / hang
Drip dry
to dry
Do not dry
Dry clean
clean
Simple installation
Step 1: Place the dryer in a ventilated area at
a distance of no less than 10cm from the wall.
If placed in a room such as bathroom, it is
suggested there are no obstacles within 1.5m of
the front of dryer and that it be kept ventilated.
Step 2: Ensuring the dryer is level
Tie a heavy object to a string on the front and
sides of the dryer, as depicted in the figure
below. If A=A' and B=B', this means the dryer
is level. If this is not the case, you can try
placing something under the dryer.
Note:
If the dryer is not level (the lean angle is over 2º), the dryer will work
intermintently or sometives even stop working
Note, when installing:
• Do not install the dryer in the open air or in a
place where it can easily be damaged by rain;
• Do not place the back of the dryer near a curtain or something in
the wind;
• Do not place the dryer near gas or flammable material.
Step 3: Regarding the fixing of the flex tube:
• Connect one side of the flex tube with the whorl to the back vent,
then rotate it till tight.
Do not dry
Do not tumble
dry
Dry in the
Dry flat
shade
Dry clean, any
Dry clean,
solvent
hydrocarbon
solvent only
14
vented tumble dryer
• The other end of flex tube should be
extended to exterior. Please refer to the
correct assembly in the pictures below.
Control panel
Below are instructions for starting and using your new dryer. Please
refer to specific sections of this manual for more detailed information.
Important Warning: To reduce the risk of fire, electric shock, or
personal injury, read this entire manual, including the Important
Safety Instructions, before operating this dryer.
1. On/Off
2. Start/Pause
3. Program(Mix/Cotton/Synthetic/1hour)
4. Dry Level(Extra/Standard/Less)
5. Anti-Crease
Instructions:
1) Press the [Program] button to select the desired programme.
2) Press the [Dry Level] button to select the desired level.
3) Press the [Anti-Crease] button to activate the Anti-Crease function.
4) Press the [Start/Pause] button to Start/Pause the programme.
5) If you need to use the child lock function, press the [Program] and
[Dry Level] buttons simultaneously for over 3 seconds to activate
the child lock function.
6) The buzzer will indicate when the cycle is over. Press the [On/Off]
button and unplug the power cable.
7) Clean the filter, the cabinet and the inner tube.
8) This symbol stands for the energy efficiency test programme
"standard cotton programme", which is best suited for drying a
normal cotton load or for use at the rated load capacity.
Additional Instructions & Notes
1. Before drying, thoroughly spin the laundry in the washing machine.
High spin speed can reduce the drying time and reduce energy
consumption.
2. For a uniform drying result, sort the laundry according to fabric
type and drying programme.
EN
KDM2739
15
Tabla de contenido
Solución de problemas
