Operating Instructions; Product Description; Part Description; Using The Product - Kunft KDM2739 Manual De Instrucciones

• This appliance can be used by children
aged 8 years old and above and persons
with reduced physical, sensory or mental
capabilities or who lack the necessary ex-
perience and knowledge provided they are
supervised or have been given instruction
concerning the use of the appliance in a
safe way, and that they understand the ha-
zards involved. Children shall not play with
the appliance. Cleaning and user mainte-
nance must not be done by children wi-
thout supervision.
• Care should be taken that, for appliances
with ventilation openings in the base, the-
se are not obstructed by carpets or other
such objects.
• If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in or-
der to avoid a hazard.
• This appliance is for indoor use only.
• The openings must not be obstructed by a
carpet.
• Children aged 3 or under should be kept
away from the appliance unless under
constant supervision.
10
vented tumble dryer

2. OPERATING INSTRUCTIONS

2.1. Product Description

Part Description

1. Top board
2. Control panel
3. Door
4. Front panel
5. Side panel
6. Filter
7. Flex tube
8. Powerplug
9. Switch
10. Tumbling drum

2.2. Using the Product

Note before use
The first step: Power source and earthing.
The dryer employs alternating current with the rated voltage and
frequency. When the voltage fluctuates between 6% of the rated
voltage, the dryer can work normally. It is recommended a special
power socket be placed by the dryer for convenience and safety.
The method for connecting the socket is depicted in the figure below.
For your safety, please make improvements as soon as possible
according to the rules and suggestions mentioned above.
Earthing
Notes:
The socket and the earth wire must be installed by an electrician to
prevent incorrect installation or use of the socket and to guarantee
the safe use of electricity. The power wire for the dryer employs a Y
connection. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in
EN
KDM2739
11