Before Using Your Wine Chiller
• Remove the exterior and interior packing.
• Check to be sure you have all of the shelves.
• Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Wine Chiller
This Wine Chiller is designed to be free standing installation only, and should not be recessed or built-in (Fully
recessed). Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded. Allow
5 inches of space between the back and sides of the wine chiller, which allows the proper air circulation to cool
the heat sink.
Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight
may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient tem-
peratures may also cause the unit not to perform properly.
After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before placing any
items in the compartment.
You can place 24 standard bottles in this wine chiller. Many bottles may differ in size and dimensions. As such
the actual number of bottles you may be able to store may vary. Bottle capacities are approximate maximums
when storing traditional Bordeaux 750 ml bottles.
lt is recommended you install the Wine Chiller in a place where the ambient temperature is between 23-26 °C (72-
78 °F). If the ambient temperature is above or below recommended temperatures, the performance of the unit may
be affected. Placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The
range of 8-1 8°C (46-64 °F) may not be reached. The default temperature set at the factory is 12 °C (54 °F).
Recommended Temperatures for Chilling Wine
Red wine
Dry / White wines
Rose wines
Sparkling wines
Temperature Ranges For Your Wine Chiller
Upper Zone
Lower Zone
9
Before first Use
Use and Operation
14-18 °C
9-14 °C
10-11 °C
7-9 °C
8-18 °C
9-18 °C
58-64 °F
48-58 °F
50-52 °F
45-48 °F
46-64 °F
48-64 °F