Tabla de contenido
Idiomas disponibles
Idiomas disponibles
-
-
..
Fig 1
SETTING THE TIMER
This limer can be used to delay the appliance startup or shutdown, this avoids wasting
electricity by optimizing operating periods.
Programming start up
• Turn on the appliance, choose the mode you want, for example cool, 24 °C, high fan
speed. Turn off the appliance.
• Press the
(9
button, the screen will display 1-24 heurs, and the
O
symbol and
symbol are flash together.(fig 3)
• Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then only the symbol is displayed on screen.(fig 4)
• Press again the (9 button or the
symbol will disappear from screen.
Fig 3
Programming shut down
• When the appliance is running, press the
several symbols are flash together. (fig 5)
• Press several limes until the corresponding time is displayed. Wait about 5 seconds, the
limer will be active, then the O symbol is displayed on screen.(fig 6)
• Press again the (9 button or the
symbol will disappear from screen.(fig 7)
Fig 5
TIPS FOR CORRECT USE
To get the best from your appliance, follow these recommendations:
• Close the windows and doors in the room to be air conditioned
(fig. 21 ).When installing the appliance semi-permanently, you
should leave a door slightly open (as little as 1 cm) to guarantee
correct ventilation;
-
-
..
Fig 2
C)
button, the timer will be canceled, and the 0
(9
button, the screen will display heurs, and
C)
button, the limer will be canceled, and the 0
Fig 6
Fig 7
*
symbol and
.:.
close
•
doorsand �
wlndows
Tabla de contenido
