Tabla de contenido
Idiomas disponibles
Idiomas disponibles
as for cool mode, with the air exhaust hase attached to enable
the moisture to be discharged outside.
To set this mode correctly:
�8
• Press the
button a number of times until the
• ln this mode, fan speed is selected automatically by the appliance and cannot be set
manually.
Switch the unit of temperature
When the appliance is standby, press the
unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
SELF-DIAGNOSIS
The appliance has a self-diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF IS DISPLAYED
LOW
TEMPERATURE
PROBE FAILURE
FULL TANK
safet tank full
�8
button 20 seconds, then you can change the
-
-
•
Fig 1
WHAT SHOULD I DO?
The appliance is fitted with a frost
protection device to avoid
excessive formation of ice.
The appliance starts up again
automatically when the
defrosting process is
completed.
If this is displayed, contact your
local authorized service canter.
Empty the internai safety tank,
following the instructions in the
"End of season operations"
paragraph.
d h
symbol appears.
-
-
•
Fig 2
Tabla de contenido
