Example Of Manual Data Logger Mode; Recall Memory; Clear The Saved Data - XS Instruments Revio Manual De Instrucciones

• Press the button
Enter "2" and confirm with
•
In the upper string of the display, the icon
Logger has been set.
• Press the button
is in progress.
The number next to the icon
Press again to end the recording.
•
Note: automatic recording is suspended when the measurement parameter is changed or by scrolling with
.

• Example of manual Data Logger mode

Example: recording a Conductivity value in manual mode
Access the "LOG" setup menu
•
Press the button
•
• Confirm with and return to measure mode, go to the COND screen.
Press the button
•
has been saved for that parameter.
Note: the manual or automatic saving of a value is confirmed by a sequence of flashes of the green LED.

• Recall memory

In measure mode in the parameter of interest, press key
•
to enter the Recall Memory function and view the saved data on
the display for that specific parameter.
• Use the directional keys
different stored values.
• Press the button
Note: the first value of a series always has a progressive number "1" and is identified by an orange icon.
IMPORTANT: If the data is saved with the instrument in error
in recall mode.
Not: when recalling the date stored in Multiview mode, one screen is reserved
for each acquisition. However, the values shown will only be those of the
parameters active at that time.

• Clear the saved data

• To clear the data stored in the instrumental memory, access the "Delete
data in memory" setup menu and select YES.
IMPORTANT: Factory reset of the pH, ISE, ORP, Cond and OXY parameters does not delete the stored data.
UM ReVio EN rev.0 04.06.2020
again and modify with directional keys
. Return to measure modeI and move to pH screen.
is on, which indicates that an automatic frequency Data
to start recording; the icon
indicates how much data has been saved for that parameter.
.
, enter the Data logging type menu and move with directional keys to MANUAL.
to save the value. The number next to the icon
and to scroll through the
to return to reading mode.
42
and the minutes.
starts flashing, indicating that memorization
indicate show much data
, the measurement will not appear even
EN