Full-Screen; Sleep Mode; Setup Menu - XS Instruments Revio Manual De Instrucciones

Sequence of parameters in measure mode:
pH
mV
Selective Ions
ORP
In the measurement screens for parameters, which accept calibration, press the key
calibration of the active parameter.

• Full-screen

In order to obtain a clearer view of the measured value, in measure mode (Multiview screen excluded),
long-press for 3 seconds the button
Press any key to return to the classic view.

• Sleep Mode

When the Sleep mode is active (see paragraph Instrument Setup Menu), the display brightness is reduced
to a minimum, thus saving significantly on battery consumption.
To exit the Sleep mode and return to normal brightness, press ANY key. Once the display brightness is
reactivated, the buttons reacquire their function (paragraph "Key functions").

Setup Menu

• In measure mode, press the key
In the SETUP screen, the cursor
•
mode.
• Access the SETUP Menu of the parameter with the button
or with the button
UM ReVio EN rev.0 04.06.2020
Conductivity
TDS
Salinity
Resistivity
to activate the full-screen view.
to enter SETUP mode.
will be positioned on the parameter that was active in measure
on the other parameters and enter using always the key
14
DO %
DO mg/L
Barometric pressure
MULTIVIEW SCREEN
to start the
, or move with the directional keys
.
EN