Temperature Measurement Atc - Mtc - XS Instruments Revio Manual De Instrucciones

Temperature measurement ATC – MTC
ATC : The direct measurement of the sample temperature for all parameters is carried out through the
•
NTC 30KΩ probe, which can be either integrated into the sensor (electrode and / or cell) or external.
MTC : If no temperature probe is connected, the value must be changed manually: in measure mode,
•
keep pressed or
directional keys; press
The set or measured temperature in a given measuring channel will be used for all parameters
•
connected to it.
Example: the temperature probe connected in the "green" measuring channel will detect the temperature
for pH, mV, ORP and ISE parameters.
UM ReVio EN rev.0 04.06.2020
Cell Constant
Calibration Solution
Last calibration data
Due calibration
Reference temperature
Temperature Compensation factor
Temperature calibration
TDS factor
Restore Factory Default
Calibration point Zero
Last calibration data
Due calibration
Salinity Compensation
Temperature calibration
Restore Factory Default
Select which parameters to view in the MULTIVIEW screen.
Data Logging type
Delete data in memory
Select parameters
Password
Backlight Mode
Brightness
Sleep Mode
Reading with HOLD
Date format
Date setting
Time setting
Temperature unit option
Select Language
Auto Off
Buzzer Mode / Restore Factory Default
until the value starts to flash; then adjust it by continuing to use the
to confirm.
16
EN