Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN /
I
Battery installation
Remove the battery compartment cover and
insert the battery provided. Once inserted, the
battery compartment will close properly. The
micro USB port must be on the upper part of the
controller.
5V DC power supply
I
Recharging the battery
Using the USB charging cable, plug the micro
USB plug into the micro USB port on the battery.
Plug the other end of the cable into the USB port
of a PC/laptop or plug it into a USB adapter to
charge the device.
I
Low battery indication
When the battery is low, the 4 LEDs on the front panel flash.
This indication is only compatible with the battery pack.
I
Switching the controller on/off
To turn on the controller, simply press the HOME/NACON button. The controller will wake up
and try to connect to the wireless receiver and then to your smartphone.
To turn off the controller, press and hold the HOME/NACON button until all the lights go out.
I
Using it for the first time with an Android™ smartphone
1. On your Android smartphone, make sure that Bluetooth
and perform a search to pair it with new devices.
2. On your controller, check that it is turned off. Press and hold the HOME/NACON and
Select button until the mode 2 (Bluetooth
3. Your smartphone will detect this new device as a controller with the following name:
«Nacon CGC». Select this on your smartphone to complete the pairing. Once the pairing has
been completed (the controller: «Nacon CGC» then moves from the list: «Available devices»
to: «Paired devices»). The lights of the controller will then stop flashing.
I
Using it for the first time with an Apple
1. On your Apple
is enabled. Start a search for new Bluetooth
2. On your controller, check that it is turned off. Press and hold the HOME/NACON and Start
button until the mode 2 (Bluetooth
3. Your Apple
«Nacon CGC». Select it on the Apple
controller should then stop flashing.
500mA
device (Ipad
, Iphone
®
®
®
device will detect this new device as a controller with the following name:
) and 4 (Di) lights flash.
®
device
®
, Ipod
), make sure that the Bluetooth
®
®
®
devices.
) and 3 (Xi) lights flash
®
®
device to complete the pairing. The lights of the
connectivity is properly enabled
®
®
connectivity
Tabla de contenido
