ROBBE POWER PEAK TRIPLE EQ-BID 8541 Manual De Uso página 37

POWER PEAK TRIPLE EQ-BID
SELECTING A MEMORY
SELECTING THE BATTERY TYPE
NiMH, LiPo, LiIo, LiFe or Pb (lead-acid) using the '+' or '-' button. Press the 'ENTER' but-
ton again to confirm your selection.
SETTING THE CELL COUNT / BATTERY VOLTAGE
can now select a cell count for NiCd and NiMH batteries within the range 1 to 14 using
the '+' or '-' button. Press the 'ENTER' button again to confirm your selection.
With the battery types LiPo, LiIo, LiFe and Pb (lead-acid) you should enter the nominal
battery voltage instead of the cell count.
Example: press the '+' button to leaf through the screen display until the arrow indicates
LiPo
Cell count Battery voltage
1 3.7 Volt
2 7.4 Volt
3 11.1 Volt
4 14.8 Volt
5 18.5 Volt
6 22.2 Volt
© robbe Modellsport
All manuals and user guides at all-guides.com
Operating instructions
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Memory. Press the
'ENTER' button and the '+ / -' symbol flashes. You
can now select a memory within the range 0 to 9
using the '+' or '-' button. Press the 'ENTER' button
again to confirm your selection.
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Battery Type. Press
the 'ENTER' button and the '+ / -' symbol flashes.
You can now select a battery type from NiCd,
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Cell Count. Press the
'ENTER' button and the '+ / -' symbol flashes. You
Battery Voltage. Press the 'ENTER' button and
the '+ / -' symbol flashes. For a LiPo battery you
can now select a battery voltage in increments of
3.7 V per cell using the '+' or '-' button. Press the
'ENTER' button again to confirm your selection.
The following voltages are available:
LiIo
Cell count Battery voltage
1 3.6 Volt
2 7.2 Volt
3 10.8 Volt
4 14.4 Volt
5 18.0 Volt
6 21.6 Volt
13
Order No.
8541
LiFe
Cell count Battery voltage
1 3.3 Volt
2 6.6 Volt
3 9.9 Volt
4 13.2 Volt
5 16.5 Volt
6 19.8 Volt