Aqua Medic Mistral 4000 Manual De Instrucciones página 5

1. Features
The Mistral membrane air pumps are designed for universal use. The housing is made from cast
aluminium and this, combined with the magnetic control system and the vibration reducing rubber
feet, results in exceptionally quiet operation.
Important note:
The pump must only be operated at the correct voltage (see type label).
2. Technical Data
Type:
Power requirements:
Power uptake:
Maximum capacity:
Capacity at 1 m (3 ft) depth (100 mbar,
1.45 psi):
Maximum pressure:
Connection pressure side:
Cable length:
Weight:
Housing:
4500
4000
3500
3000
2500
2000
1500
1000
500
0
0
Fig. 1: Capacity of the Mistral 4000
3. Connections
The pump is connected to the equipment it supplies with an aquarium air hose (12 mm, ½"). If
ozone is to be used, ozone resistant tubing (e. g. silicone) must be used after the ozonizer.
4. Installation
The pump should be positioned in a dry place. Care should be taken to ensure that water cannot
enter the pump when, for instance, if it is switched off for aquarium maintenance or during a power
failure. There are two methods of installation:
- above the water level – see Fig. A below
- below the water level. In this case, a reliable non-return valve must be fitted in the air tube –
see Fig. B below.
Ensure that the power plug can easily be reached at any time.
All manuals and user guides at all-guides.com
Mistral 4000
220 - 240 volts ~ 50/60 Hz
35 watts
4,000 litre/hour,
(approx. 1,000 gph)
2,900 litres/hour (750 gph)
>300 mbar, 4.35 psi
air tube 12 mm (½")
3 m
5.6 kg (approx. 12.4 lbs)
cast aluminium
0,1 0,2
pressure (bar)
0,3 0,4
5