Call Transfer - Jensen PHASE LINEAR Serie Manual Del Usuario

Call Transfer

While talking, to transfer audio from the head
unit back to the mobile phone, press and hold
the SRC (Transfer) button (2). The LCD will
display "TRANSFER" for 3 seconds and the
radio will automatically mute the volume.
• When making an outgoing call, it's not
possible to transfer the call if it is not yet
answered. You can only transfer a call
after it has been answered.
• The time it takes to transfer the call back
to the phone will vary depending on your
phone model.
NOTE: The BT1613 can only handle one call
at a time, two lines cannot be active at one
time even if your phone has call waiting.
Incoming Call Ringing Volume
The MENU allows you to set the default ringing
volume for all incoming calls.
1. Press and hold the DISP (display) button
(9) to access the MENU.
2. Press the DISP button repeatedly to select
the "BT VOL" option.
3. Use the AUDIO CONTROL to adjust the
ring volume from "00" to "42".
All manuals and user guides at all-guides.com
Advanced Audio Distribution
Profile (A2DP)
The BT1613 supports A2DP, which allows you
to stream audio files from your Bluetooth
compatible phone, PDA or personal music
player and listen to the music through your
BT1613.
Since there are a number of Bluetooth audio
players available on the market, operations with
your Bluetooth audio player using this unit vary
greatly. Please refer to the instruction manual
that came with your Bluetooth audio player as
well as this manual while operating your player
with the BT1613.
NOTE: Play/pause, song selection, etc. are
not supported. In addition, song information
(e.g. elapsed playing time, song title, song
index, etc.) cannot be displayed on this unit.
NOTE: Please turn A2DP off on your phone
before attempting to make a phone call, as
unexpected results may occur depending
on your mobile phone model.
20
BT1613