Environmental Protection - Worx Professional WU024 Manual De Instrucciones

Working hints for your working
light
1
THE BULB IS DIM OR NOT WORKING WHEN I TURN ON THE
SWITCH, WHY?
If the battery is not fully charged, recharge the battery with the
supplied battery charger. (Note: Do not charge the battery with
a different charger. Charge the battery pack only with the charger
provided.)
Also check if the bulb you used is correct, if not, replace it with a
correct one following the instructions in this manual.
Warning: The bulb become hot when used, it could be
hurt your finger. Turn off the switch let your flashlight cool for
several minutes and ensure the bulb becomes cool before you
check the bulb.
2
REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems, as above, and having not used a battery
pack for a prolonged storage will reduce the battery pack working
time. This can be corrected after several charge and discharge
operations by charging & working with your flashlight. Do not re-
charge your battery pack below 0ºC and above 45ºC as this will affect
performance.
All manuals and user guides at all-guides.com
7
Maintenance
Your tool requires no additional lubrication or maintenance. There are
no user serviceable parts in your tool. Never use water or chemical
cleaners to clean your tool. Wipe clean with a dry cloth. Always store
your tool in a dry place.

Environmental protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.