H.Koenig bw1688 Manual De Instrucciones página 9

7. FOR A 5L KEG : Replace the beer tube with the adapter (New Heineken connector) to the
device's faucet. Then, connect the adapter to the beer connector of tape (Figure 5).
When installing the new connector to the Heineken keg, you must firstly install the clear beer
tube one end to the connector : one end to the tap mechanism, then install the connector to
the Heineken keg (Figure 6).
8. After installing the valve device, keep the intake beer pipe towards the middle position of the
middle groove of the two handles of the keg.
9. Keep the bottom of the refrigeration barrel and beer keg free of dirt and sundries, otherwise the
refrigeration effect will be affected.
FIGURE 4 (For 5L keg only)
Figure 5 (For 5L keg only)
FIGURE 6 (For 5L keg only)