H.Koenig bw1688 Manual De Instrucciones página 7

PARTS & FEATURE
1.Handle for top cover
2.Top cover
3.Connector for beer out
4.Keg
5.Tap
6.LED display
INSTALLATION & OPERATION
A. INSTALLATION
1. Take out the beer cooler from its package. Place the beer cooler on a steady and horizontal
surface, and make sure the beer cooler is at least 10 cm away from other appliances or walls,
on each side so as to allow correct ventilation on the appliances to get better performance.
2. Install the tap handle connect the tap, make sure both ends fit together perfectly (As shown in
figure1).
3. Set the water drip tray into the notch provided (As shown in figure 2).
7. Digital control button
8. Drip tray
9. AC power switch
10. Rear cover
11. Connect valve
12. Connector for air in