Alecto baby DBX120 Manual De Instrucciones página 12

GB
13
Buttons operation
Menu button / Confirm button
Up in menu / Volume +
Down in menu / Volume -
Return to the previous step in the menu
Parent unit on and off
Back to the display's start-up screen
14
Parent unit start-up screen
No connection with
baby unit
Good connection with
baby unit
Night light is enabled
on the baby unit
15
Explanation at
Sensitivity
The Full Eco mode is active when the baby is sleeping and making no sounds.
The baby unit will then switch to standby and the transmitter is turned off, to ensure that there's no more
transfer between the baby unit and parent unit.
When the baby starts making sounds, the transmitter is enabled again and you'll be able to hear the baby
through the parent unit. The sensitivity of this function may be set in 4 steps using the
Step 1 (lowest sensitivity) to step 4 (highest sensitivity).
At step 4 the Full Eco mode is switched off to allow for a continuous connection.
Sound alert
If the baby is making a lot of noise for at least 3 consecutive seconds, and the sound of the parent unit is
set to silent , the light of the display illuminates.
At the same time the sound alert icon
(see also
(see also
(see also
(see also
HI TEMP = Baby unit temperature alert > 30 °C
LO TEMP = Baby unit temperature alert < 10 °C
Sound alert is ena-
bled
Sound on the parent
unit is off
Battery fully charged
starts flashing and the parent unit will emit a tone.
12
)
15
)
8
)
8
)
4
Battery 2/3 full
Battery 1/3 full
Battery nearly empty
buttons: