Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and
removed from the appliance. When the appliance is not to be used for a period of time
it should be stored in its original packaging and stored in a dry dust free environment.
Gas Cylinder
The gas cylinder should not be dropped or handled roughly! If the appliance is not in
use, the cylinder must be disconnected. Replace the protective cap on the cylinder
after disconnecting the cylinder from the appliance. The gas cylinder must be sited
outside the body of the appliance.
Always connect or replace the cylinder in a well-ventilated area and away from any
source of ignition, never in the presence of a flame, spark or heat source. Cylinders
must be stored outdoors in an upright position and out of the reach of children. The
cylinder must never be stored where temperatures can reach over 50°C. Do not store
the cylinder near flames, pilot lights or other sources of ignition. DO NOT SMOKE.
This gas pizza oven is designed for use outdoors, away from any flammable materials.
It is important that there are no overhead obstructions and that there is a minimum
distance of 1 m from the side or rear of the appliance. It is important that the ventila-
tion openings of the appliance are not obstructed. The appliance must be used on a
levels, stable surface. The appliance should be protected from direct draughts and
shall be positioned or protected against direct penetration by any trickling water (e.g.
rain).
Make sure that the gas cylinder compartment (if any) is not obstructed, keep it
ventilated and clean.
Parts sealed by the manufacturer or his agent must not be altered by the user. No
modifications should be made to any part of this pizza oven and repairs and mainte-
nance should only be carried out by a registered service engineer.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the gas
cylinder, regulator, burner and burner ports. Spiders and insects can nest within and
clog the burner/venturi tube at the orifice. A clogged burner can lead to a fire beneath
the appliance.
Fit the hose to the appliance using a spanner to tighten it onto the connection thread.
If the hose is replaced it must be secured to the appliance and regulator connections
with hose clips. Disconnect the regulator from the cylinder (according to the direc-
tions supplied with the regulator) when the appliance is not in use.
The appliance must be used in a well ventilated area. Do not obstruct the flow of
combustion air to the burner when the appliance is in use.
ONLY USE THIS GAS PIZZA OVEN OUTDOORS.
17
BEFORE USE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy
water solution
TO CHECK FOR LEAKS
Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid
with 3 parts water.
Ensure the control valve is "OFF".
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the
connections are secure then turn ON the gas.
Brush the soapy solution onto the hose and all joints. If bubbles appear you have a
leak, which must be rectified before use.
Retest after fixing the fault.
Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified. Do not attempt to cure leakage but
consult your gas dealer.
LIGHTING INSTRUCTIONS
1. Ensure well ventilation before lighting the burner.
2. Make sure the knob is in the "OFF" position. Then push the control knob and slowly
turn the knob anticlockwise to "HI" position for 5 seconds until you hear a click and
the burner ignites (A). If not repeat this process.
3. You can adjust the fire from HI to LOW by slowly turn the control knob clockwise (B)
4. Please turn the control knob to "HI" position, then push the knob and clockwise to
"OFF" position to turn off your pizza oven. (C)
5. If the burner has not lit after retrying wait 5 minutes and repeat step 2.
18
EN
Tabla de contenido
