Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7
•
Make sure that the power supply corresponds to the rated power on the charger and
adapter.
•
When the red light on the charger is on, it indicates that the battery is charging, while the
green light indicates that charging is complete. The average charging time is 2 hours.
•
When charging is complete, disconnect the charger from the power supply and the battery
from the charger.
•
Please make sure that the battery is recharged at least once every six months when the
chainsaw is not used for a long period of time.
Working conditions
1.
Maintain the charging temperature of the charger and battery between 0°C ~ 45°C and the
discharge temperature of the battery between -10°C ~ +60°C.
Correct use of the charger
Before using or charging, make sure that the battery and
the charger are both dry.
1.
Only use the supplied charger to charge the battery. Failure to do so may result in fire or
explosion. Use the original charger to ensure tool safety.
2.
Check the charger, cord and plug before each use. If it is damaged, have it repaired by
specialised personnel and use only original parts. Do not use a defective charger and
operate it yourself to ensure tool safety.
3.
The mains socket used for the charger must be earthed. Ensure that the supply voltage
corresponds to the rating of the nameplate on the charger. If it does not correspond, it may
result in electric shock.
4.
Disconnect the charger from the mains before closing or opening the battery connection.
5.
Keep the charger clean and away from damp environments and rain. Do not use the
charger outdoors. The presence of dirt or moisture increases the risk of electric shock.
196
Art. 318
Chainsaw Magma E-200 LA
Usage
Art. 318
Chainsaw Magma E-200 LA
Usage
6.
The charger can only be used to charge the original battery. If used for other batteries, it
can cause personal injury and cause fire.
7.
Avoid mechanical damage to the charger. Otherwise it may result in an internal short
circuit.
8.
Do not use the charger on the surface of flammable materials (such as paper and fabrics).
9.
If the equipment is damaged, it must be replaced by customer service to prevent risks.
10. The battery is not fully charged when delivered. Therefore, the user must fully charge it
before using it for the first time. For the first charging cycle, we recommend a time of at
least 2 hours. Insert the battery onto the base and plug the charger into the mains socket.
11. When charging is complete, disconnect the charger from the power supply and the battery
from the charger.
12. Charging time is about 2 hours after the battery is completely flat. Do not charge the
battery for any longer, as this may damage the battery.
Operating warnings
When using this tool, wear suitable clothing and work gloves. The risk of
injury can be greatly reduced by wearing appropriate protective equip-
ment and ensuring proper tool operation.
Make sure the tool is working properly before each use. The start/stop
switch and the safety switch must be fully functional. If the switch is
loose, the power must be turned off. If the switch is damaged, do not use
the tool.
Make sure that the voltage of the power supply is consistent with that
indicated on the nameplate of the tool.
Make sure the chainsaw is working properly to ensure
optimal working conditions.
For further information about the product, please contact [email protected]
7
197
Tabla de contenido
