Important; Cleaning The Rotary Brush - Taurus CROSSBACK ALL OVER Manual Del Usuario

- Disconnect the dust tank pressing the button
(B), remove the cyclone and the filter(Fig.8)
- Remove the filter from its housing (Fig.9).
- To reassemble the filter, proceed with the
above instructions, in reverse order.
- IMPORTANT: The filters can be cleaned with
cold water, but they must be left to dry for a
minimum of 24 hours before reusing them.

CLEANING THE ROTARY BRUSH:

- At the bottom of the brush you have to press
the button to unpin the brush(Fig.10)
- Clean the brush with the help of scissors
- To reassemble, follow the above instructions
but in reverse.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Press the button (J) and remove the battery
from its housing (Fig.11).