After Each Use - Craftsman 580.752101 Manual Del Operador

Ocultar thumbs Ver también para 580.752101:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Air Cooling System
Over time debris may accumulate in cylinder cooling fins and
cannot be observed without partial engine disassembly. For
this reason, we recommend you have an qualified Sears
service dealer clean the cooling system per recommended
intervals (see Maintenance Schedule). Equally important is to
keep top of engine free from debris. See Clean Debris.

AFTER EACH USE

Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
use:
1. Flush detergent system by turning its detergent shut-off
valve to "Off" position and run pressure washer with
PrecisionSpray™ Selector in a low pressure position.
Flush for one to two minutes.
2. Shut off engine, turn off water supply, point gun in a
safe direction and squeeze trigger to relieve trapped
pressure, engage trigger lock on spray gun and let
engine cool.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keep high pressure hose connected to pump and spray gun
while system is pressurized.
• ALWAYS point spray gun in safe direction and squeeze spray
gun trigger, to release high pressure, every time you stop
engine. Engage trigger lock when not in use.
All manuals and user guides at all-guides.com
3. Disconnect hose from spray gun and high pressure
4. Empty pump of all pumped liquids by pulling recoil
5. Coil high pressure hose and properly hang it on hook
6. Store unit in a clean, dry area.
7. If storing for more than 30 days see Long Term Storage
WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK
• Store away from furnaces, stoves, water heaters, clothes
19
outlet on pump. Drain water from hose, gun, and nozzle
extension. Use a rag to wipe off the hose.
handle about 6 times. This should remove most liquid in
pump.
provided on accessory tray.
on next page.
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
dryers, or other appliances that have pilot light or other ignition
source because they can ignite fuel vapors.
Tabla de contenido
loading

Tabla de contenido