Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2610067262 GDR GDS GDX18V-1860C 07-21.qxp_GDR GDX 7/16/21 7:30 PM Page 10
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
Inserting and releasing battery
pack
Set Forward/Reversing lever (3) to the
center (locked position). Slide charged
battery pack (11) into the housing until
the battery pack locks into position (Fig.
2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the
handle, should it become loose due to
vibration.
To remove the battery pack, press the
battery pack release button (10) and
slide the battery pack (11) completely
out of tool housing (Fig. 3).
Fig. 2
11
Inserting and removing
accessories
locked in bit holder by pulling on bit
after it has been inserted (Models GDR
GDX).
The GDR and GDX bit holder accepts
only standard 1/4" hexagonal shank
accessories with power groove.
Model GDR18V-1860C
Your GDR18V-1860C tool is equipped
with a quick release bit holder. To insert
a bit (21), simply pull locking sleeve (2)
forward, insert desired bit into bit holder
Assembly
Disconnect battery
pack from tool before
Fig. 3
10
11
To
avoid
loss
of
control, ensure bit is
(1) and release locking sleeve (Fig. 4).
To remove an accessory, pull locking
sleeve (2) forward and remove it from
the bit holder.
Fig. 4
GDR18V-1860C
22
21
23
Model GDS18V-1860C
Your GDS18V-1860C tool is equipped
with a 1/2" square drive with friction ring
and thru-hole designed for impact-ready
sockets. Attach only high quality
accessories with the proper size square
drive designed for use with impact
wrenches.
To install a socket (24), insert the square
output drive (16) into the square end of
the socket. To remove, pull off output
drive (Fig. 5).
Fig. 5
GDS18V-1860C
16
24
Model GDX18V-1860C
Your GDX18V-1860C tool is equipped
with a Socket-Ready™ quick release 1/2"
square drive (Fig. 6, 16). The Socket-
Ready™ drive includes a 1/4" hex bit
10
1
2
21
Tabla de contenido
