Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For alcove installations: Install water-resistant wall
material around the unit to conceal the module edge.
Tape, mud, and finish the wall material. Seal the openings
around the valves and outlets with plumbers putty.
OTHER CONSIDERATIONS
Install all faucet and drain trim according to the
manufacturer's instructions.
Install any extra grab bars or towel bars through module
walls, and fasten in place directly to bridging previously
installed. Select screws, bolts, and backing to properly
secure the accessories. Carefully seal around the
fastener surfaces. Follow all manufacturer's instructions.
Install the shower door according to the manufacturer's
instructions.
CLEAN-UP AFTER INSTALLATION
CAUTION: Risk of product damage. Do not use
abrasive cleansers.
When cleaning up after installation, use warm water and
an approved liquid cleaner to clean the surface.
Stubborn stains, paint, or tar can be removed with
turpentine or paint thinner.
CAUTION: Risk of product damage. Do not
allow cleaners containing petroleum distillates to
remain in contact with acrylic surfaces for any length
of time.
Plaster can be removed by scraping with a wood edge. Do
not use metal scrapers, wire brushes, or other metal tools.
Use warm water and an approved liquid cleanser to
provide mild abrasive action to remove residual plaster.
Kohler Co.
7
2x4 Studding
2x2 Brace
Module
Water-Resistant Wall
Material
Fig. #11
1011310-2-
B
Tabla de contenido
