Tokai LAR-203 Manual De Usuario página 24

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
5. FUNCTIONS OF THE CONTROLS
3) Press the RPT button once to play the current track repeatedly, and the RPT ONE will be visible on
the LCD display.
During MP3/WMA disc, MMC/SD or USB mode, press the RPT button twice continuously to play the
current folder repeatedly, and the RPT DIR will be visible on the LCD display.
In the process of RPT, press RPT button again to stop playing repeatedly mode and the LCD will display
OFF.
4) Press the RDM button to play all tracks on disc in random order, and the RANDOM will be visible on
the LCD display. In the process of RDM, press RDM button again to stop playing in random order and
the LCD will display OFF.
5) Press the 5 and 6 buttons to move up and down 10 tracks at a time. When the remained total tracks
are lack of 10, the both buttons are inactively. Press and hold the 5 and 6 button to select next or
previous folder to be played.
15. MODE AND PTY (PROGRAM TYPE) BUTTON
Press the MODE button to change among tuner (radio), disc (when a disc is loaded), USB (when an
USB stick is inserted) and AUX mode.
In Radio mode, press MODE/PTY button longer to select one of the following mode: POP - - NEWS
While selecting PTY TYPE, its selection is implemented by preset buttons as described in preset key.
(Press one of the 6 preset buttons shortly and repeatedly to select the PTY TYPE in the preset
button) .When turning on a PTY program, the PTY program is flashed on the LCD.After selecting a
desired PTY program and no operation for 2 seconds, it will search for the station of the PTY program.
During 1 loop, if the desired station of the PTY program is not found, PTY NONE is displayed, then
returns to previous normal radio.
16. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can connect any matched
external audio device to this socket. Use the volume knob to adjust volume.
17. USB SOCKET
In order to play the file in the USB stick, turn over the plastic cover cap then insert the USB stick into
the USB socket. The system will change into the USB mode automatically, and then play the first file in
the USB.
18. BAND BUTTON
1) In Radio mode:
Press this button briefly to select the radio broadcasting band you would like to hear. The AM/FM band
is toggled cyclically through the tuning bands: ->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
2) During MP3 file in disc, or USB/SD mode:
Press the BAND button; it is activated as cyclical selecting song mode as follows: -> TRACK SERIAL
NUMBER SEARCH -> FIRST CHARACTER SEARCH -> DIRECTORY SEARCH
A) In TRACK SERIAL NUMBER SEARCH mode, the LCD will display TRK 000 (If the number of tracks
is less than 100 and more than 9, it will display TRK 00 ) and flash the biggest digit 0 that the SD card,
USB or MP3/WMA disc contains. Rotate the VOL knob to select the number of the flashing digit from 0
~ 9. Then press SEL button to confirm and flash next smaller digit 0. With the same means, select the
number of the flashing digit. After finishing inputting the number of all flashing digit, press SEL button
to play the track of the corresponding number.
23
Tabla de contenido
loading

Tabla de contenido