Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
5. FUNCTIONS OF THE CONTROLS
4) PI SOUND/ PI MUTE:
PI SOUND mode: if a car cruises between buildings that could cause reflecting signals, a phenomenon
may occur, due to different PI codes being received from the same AF source. When different PI sounds
(DIP) are heard occasionally, this will happen for less than 1 second.
PI MUTE mode: under above same situation, a mute sound will be heard for less than1second.
5) RETUNE L / RETUNE S:
The initial time of automatic TA search or PI SEARCH mode is selected.
When PI information is not received for retune interval, the radio starts to retune to next same PI
station.
When same PI station does not receive 1 cyclic search, the radio goes to last station and waits for 4-5
minutes until PI code is received.
RETUNE L mode: selected as 90 seconds.
RETUNE S mode: selected as 60 seconds.
6) MASK DPI/MASK ALL:
MASK DPI mode: masks only the AF which has different PI.
MASK ALL mode: masks the AF which has different PI and NO RDS signal with high field strength.
7) BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
8) VOL LAST/VOL DEFA
VOL LAST: The radio switches on at the actual volume it had when it was last switched off.
VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can pre-select a constant
switch-on volume by using the VOL knob.
9) CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
9-14. PRESET STATION MEMORY,
, INTRO, REPEAT, RANDOM,-10, +10 BUTTONS
A) During radio mode:
Go to any preset station by pressing one of the 6 preset station buttons (1-6).
If one of these buttons is pressed for more than 2 seconds, the current playing radio station will be
memorized into the selected preset button.
b) During disc, MMC/SD or USB mode:
1) Press
button briefly to interrupt the playback of the disc, MMC/SD or USB. Press again to
resume normal playback of the disc, MMC/SD or USB.
Press the
button and hold for approximately 0.5 seconds to play the first track of the disc,
MMC/SD or USB.
2) Press the INT button to sample the first 10 seconds part of each track, and the INTRO will be
visible on the LCD display. In the process of INT, press INT button again to stop sampling and to
continue playing the current track, and the LCD will display OFF.
22
Tabla de contenido
