Insta-Flo ™ Gun; Pressure Gauge - DuPont FROTH-PAK Manual

"B" Pressure Regulator

Pressure Gauge

"B" Tank
Plastic Protective Cap .
(Remove before
attaching hoses)
"B" Tank Nitrogen
Hose (mark hose
ends with yellow
& blue electrical
tape)
WARNINGS:
NEVER use oxygen regulators
on cylinders of which the gas
pressure exceeds 3,000 pounds
per square inch .
NEVER use oil or petroleum base
grease on regulator, inlet connection,
or cylinder valve . An explosion or
fire could result . The lubricant used
on this regulator adjusting screw
is Molykote ® 44 Medium High
Temperature Grease" which is a
non-petroleum base grease .
NEVER stand in front of, or behind a
regulator while opening the cylinder
valve .
DO NOT use WD-40 or DC-44 on any
Insta-Flo Gun parts .
™
A-4