Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DISPLAY AND CONTROL PANEL
6+7 Child lock
6+7
The child lock blocks the function buttons, so that children cannot inadvertently
change the settings. In order to activate the child lock during the washing, push
the buttons
hold them for about 3 seconds. In order to deactivate this function during the wash
cycle, again push the same buttons and hold them for about 3 seconds.
Note 1: When the child lock is activated, the display shows the symbol
Note 2: The lock is not automatically deactivated at the end of the wash pro-
gramme.
Switching the sound signal on/off
In order to activate this function, keep the button
The sound signal confirms the activation of this function. In order to re-enable the
function, push the button
saved until the next change.
Setting of the programme Individual
In order to set the programme Individual, turn the selector dial to any of the wash
programmes and select the temperature, spin speed and additional functions.
Keep the button
programme Individual. The default wash programme is cotton.
Remove excess foam
Detect excess foam: Excess foam forms when too much detergent is used, which
makes washing and rinsing less effective. The appliance automatically detects and
removes excess foam.
6
(Temperature selection) and
6
and hold it for about 3 seconds. This setting remains
7
pressed for about 3 seconds to confirm the settings of the
7
(Spin speed) simultaneously and
6
pressed for about 3 seconds.
.
99
Tabla de contenido
Solución de problemas
