HQ-Power HQSM10005 Manual Del Usuario página 7

7.2 Operation with Remote Control
INTERVAL button
adjust the interval between two bursts of smoke
DURATION button
adjust the duration of the smoke burst
timer LED
illuminates when the timer function is activated
ready LED
illuminates when the smoke machine is fully warmed up
power LED
illuminates when the smoke machine is switched on
TIMER button
activate/deactivate the timer function
CONTINUOUS button
activate/deactivate the continuous smoke burst function
MANUAL button
manual override button
1. Make sure to fill the tank with smoke liquid.
2. Switch on the device and wait for the machine to warm up.
While the device is warming up, smoke output will not be possible. However, the device can be
programmed.
3. Press the button on the remote control to trigger the fog output. The device will continue to output
fog as long as the button is pressed.
4. Switch off the device after use.
V. 01 – 06/01/2016
1. interval button
2. duration button
3. timer LED
4. ready LED
5. power LED
6. timer button
7. continuous button
8. manual button
The functions above only work in timer mode.
Never operate the device without smoke liquid at any time.
HQSM10005
7
will be displayed.
©Velleman nv