Hansgrohe F23 76818000 Modo De Empleo/Instrucciones De Montaje página 9

Programming
General operation
Steps Button
1. Press 'MENU' 1x - 'Filter status'
display
2. Press 'MENU' 1x - 'Flow rate'
display
3. Press 'MENU' 1x - 'Total counter'
display
4. Press 'MENU' 1x - 'Set filter
capacity' display
5. Press 'MENU' 1x - 'Counter
reading' display, 287l entered
6. Press 'MENU' 1x - 'Alarm' display
7. 1x press 'MENU' - 'Settings'
display
After 30s without activity, the display automatically returns to 'Filter status'.
Entering the filter capacity
The filter capacity can be found on the filter label.
Steps Button
1. Press and hold 'MENU' for
approx. 5s - active digit flashes
2. Press 'MODIFY' - set the active
digit
3. Press 'MENU' - to confirm the
desired digit and move to the next
digit - active digit flashes (repeat
procedure until the last digit
is reached)
Resetting the filter capacity (when replacing the filter)
Steps Button
1. Menu item 'Filter status' - entered
filter capacity reached
or maximum service life
of 12 months exceeded
2. Press and hold 'RESET' for approx.
5s - 'reset 5s' appears in the
display, the countdown
commences
3. The filter capacity is now reset
and the last entered value
appears
After reset, a timer is started which indicates a filter change after 360 days.
Counter reading (when inserting the cartridge)
It is possible to retrieve the total counter readings of the last 5 filter cartridges
when they were changed.
English
Steps
1.
Display
1004.0 L
2.
14.9 l/min
∑
3500 L
Alarm setting
CAP SET
Steps
1004 L
1.
∑ 287 L
2.
ON
3.
L
Unit setting (litre or gallon)
Steps
Display
1.
CAP SET
01004 L
2.
14.9 l/min
3.
CAP SET
After reset, a timer is started which indicates a filter change after 360 days.
01005 L
Setting pulses per litre
Calibration factor to be able to use additional sensors.
Steps
Display
1.
2.
72.1 L
3.
reset 5s
4.
1004.0 L
740 pulses per litre is standard
Button
Press and hold 'MENU' for
approx. 5s - The digit '-1' appears
= total counter reading for
the penultimate filter cartridge
exchanged
Press 'MENU 1x - the digit '-2'
appears, further pressing up to '-4'
possible
Button
Press and hold 'MENU for
approx. 5s - 'Beep on'
or 'Beep off' flashes
Press 'MODIFY' once - change
to 'Beep on' or 'Beep off'
Press 'MENU' 1x - the current
setting is accepted
Button
Press and hold 'MENU' for
approx. 5s - 'L' or 'Gal' flashes
Press 'MODIFY' 1x - change to "L"
or "Gal"
Press 'MENU' 1x - the current
setting is accepted
Button
Press and hold 'MENU' for
approx. 5s - 'L' or 'Gal' flashes
Press and hold 'MODIFY' again
for approx. 10s - 'Pulses per litre'
appears, active digit flashes
Press 'MODIFY' - set the active
digit
Press 'MENU' - to confirm the
desired digit and move to the next
digit - active digit flashes (repeat
procedure until the last digit is
reached)
Display
CAP SET
1004 L
-2
∑ 5 L
Display
ON
ON
OFF
Display
L
L
Gal
Display
L
-2
∑ 5 L
0020 p/L
0120 p/L
9