Fein GRIT GXE Manual De Instrucciones página 11

Character Unit of measurement,
international
mm
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
For your safety.
Do not use this machine before you have thor-
oughly read and completely understood theseop-
erating instructions, including the figures,
specifications, and safety regulations.
Please also observe the relevant national industrial safe-
tyregulations (e. g. in Germany: BGV A2, BGR 500).
Non-observance of the safety instructions in the said
documentation can lead to an electric shock, burns
and/or severe injuries.
This Instruction Manual should be kept for later use and
enclosed with the power tool, should it be passed on
or sold.
Intended use of the machine.
This machine is intended for deburring and polishing
metal materials using the application tools and accesso-
ries recommended by FEIN in weather-protected envi-
ronments. The machine is not approved for use with
grinding discs.
Special safety instructions.
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. Where appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments. The eye
protection must be capable of stopping flying debris
generated by various operations. The dust mask or res-
pirator must be capable of filtrating particles generated
by your operation. Prolonged exposure to high inten-
sity noise may cause hearing loss.
While working, do not wear loose clothing, jewellery or
open, long hair. Despite protective devices, loose
objects can be snagged or caught by moving parts and
lead to injury.
Do not use brushes, grinding and polishing tools that
have not been specifically developed or approved by the
manufacturer. Safe operation is not ensured only
because brushes, grinding and polishing tools fit on
your machine.
The allowable speed of the brushes, grinding and pol-
ishing tools must be at least equal to the maximum
speed marked on the machine. Tools running faster
than their rated speed can break apart and be thrown
about.
Always use undamaged clamping discs of correct size
and shape for the selected application tool. Suitable
flanges support the application tool and thus reduce the
danger of tool breakage.
Unit of measurement,
national
mm
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
Ø =Max. application tool diameter
D
Ø =Diameter of mounting hole
H
T=Thickness of application tool
Basic and derived units of measurement
from the international system of units SI.
2
Please observe that brushes can lose wire bristles or
fragments during operation. Do not overstress the wires
by applying excessive load to the brush. The wire bris-
tles can easily penetrate light clothing and/or skin.
Do not use damaged application tools. Before each use,
check application tools such as wire brushes for loose
or broken wires. The outside diameter and the thick-
ness of the application tool must be within the capacity
rating of your machine.
Always use the protective devices attached on the
machine. The protective devices must be securely
mounted to the machine in order to achieve maximum
safety. The protective devices are supposed to protect
the user from grinding particles thrown from the
machine and from accidental contact with the brushes,
grinding and polishing tools.
Warning! Danger of fire and explosion! When grinding
metals (e.g., aluminium or magnesium), dust develops
that may be combustible or explosive. Do not operate
the machine near flammable materials. Sparks could
cause these materials to ignite.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal pro-
tective equipment. Fragments of workpiece or of a bro-
ken accessory may fly away and cause injury beyond
immediate area of operation.
The workpiece must securely face flat on the grinding
rest. Workpieces that are too small may not be worked.
Danger of injury by the workpiece being thrown from
the machine.
The surface being worked can become very hot. Do not
touch it with your hands.
Never touch rotating brushes, grinding and pol-
ishing tools. Danger of injury.
In situations of danger, immediately press the safety
pushbutton. The machine runs on for approx. 50 sec-
onds.
Clean the ventilation openings on the power tool at reg-
ular intervals using non-metal tools. The blower of the
motor draws dust into the housing. An excessive accu-
mulation of metallic dust can cause an electrical hazard.
Ensure that the machine is positioned securely and hor-
izontal. Serious injuries can be caused if the machine
tips over during operation.
The mains plug of the machine may be mounted only by
a qualified electrician. The protective conductor in the
mains socket outlet must be connected with the pro-
tective earthing of the mains supply.
en
11