34/35
9.3.- Other requirements
- The equipment must be protected against the spill or the projections of liquids.
- There must be sufficient ventilation.
- The intended use of the equipment requires that all parts of the equipment must be assembled,
in adequate working conditions and do not display deformities or breakage.
- The equipment must be used with an electrical and compressed air supply that is activated,
stable and in accordance with established technical specifications.
- For use according to that prescribed, one must also comply with the indications contained in
the instruction manual and especially those on safety, operation and control described in this
manual.
- Before each start up and especially after any repairs, one must check that all the components
are perfectly tightened.
Installation drawing
ENGLISH