Technical Data - Riello 40 FS5D Instrucciones De Instalación, Uso Y Mantenimiento

TECHNICAL DATA

TYPE
Thermal power
Pci
Natural gas
(Family 2)
Pressure
Electrical supply
Motor
Capacitor
Ignition transformer
Absorbed electrical power
For gas family 3 (LPG) ask for separate kit.
COUNTRY
GAS CATEGORY
The burner meets protection level of IP X0D (IP 40) as EN 60529.
The burner is approved for intermittent operation as per Directive EN 676.
CE marking in accordance with Gas Appliance Directive 90/396/EEC; PIN 0063AP6680.
Burner with CE marking in conformity with EC Directives: EMC 2004/108/EEC, Low Voltage
2006/95/EC and Machines 2006/42/EC.
Gas train according to EN 676.
1 – Air damper opening motor
2 – Air dampers
3 – Capacitor
4 – Motor
5 – Air pressure switch
6 – Grommet
7 – Hood fixing screw
8 – 6 pole socket for gas train
9 – 4 pole socket for 2
10 – Control box
11 – Lockout lamp with reset button
NOTES
– The grommet (6) supplied with the burner, must be fitted to the same side of the gas train.
– After having installed the burner verify the access to the fixing screws of the cover.
If necessary replace them with the fixing screws (7, fig. 1) supplied as equipment.
3312
587M
12 / 23  58 kW
8  12 kWh/m
min. 10 mbar – max. 40 mbar
Single phase, 230 V ± 10% ~ 50Hz
Run current 0.75 A - 2800 rpm - 294 rad/s
2 F
primary 230 V / 0.2 A
0.15 kW
IT - AT - GR - DK - SE
II2H3B/P
10
9
8
7
nd
stage
6
10.000 / 20.000  50.000 kcal/h
–
– 7.000  10.340 kcal/m
3
–
GB - IE FR
II2H3P II2Er3P
5 4
1
GB
ENGLISH
3
secondary 8 kV
DE LU - PL
II2ELL3B/P II2E3B/P
D7389
3
Fig. 1
11
1
2