Use The Memory Function; To Read The Average Value; To Read The Measurement Value; To Delete The Memory Value - Lumiscope 1146 Manual De Instrucciones

Take a Measurement
4
Press the " " button to turn the unit off.
START
STOP
The unit will automatically turn off after two minutes if you have forgotten
to turn it off.
If selected to display the date and time, the current date and time will display
when the unit is turned off.
NOTE:
To stop the inflation or measurement, press the "
The unit will stop inflating and then release and turn off.

Use the Memory Function

To read the measurement value

Press the "MEM" button to display the set of measurement values with the
measuring date from the most recent to the oldest.
Press the "SET" button to display the next set of measurement values with the
measuring date from the oldest to the most recent.
The 1st latest
measurement value
OR
" button at any time.
START
STOP
21
..............................................
Forward
Backward
The 2nd latest The 90th latest
measurement value
measurement value
23
Use the Memory Function
The unit stores the blood pressure and pulse rate in the memory each time
a measurement is completed. It can automatically store180 sets of
measurement values for 2 users (2 * 90). The earliest record is deleted to
save the latest measurement value when any one user has more than 90 sets.
The unit also calculates an average reading based on the values of the
latest 3 measurements taken.

To read the average value

Press the "MEM" button; the average value of the current user's latest 3
measurements will display.
Use the Memory Function

To delete the memory value ...........................................

In the memory reading mode,
press
the unit will display " ".
Press the "MEM" button and confirm "
If you are sure all of the corresponding user's data can be deleted, press the
" " button; all the corresponding user's data will then be deleted and the
START
STOP
unit will turn off.
Note: If you have set " ", but do not press a button for 2 minutes, the unit
will turn off automatically, but the corresponding user's blood pressure data
will not be deleted. The delete operation must be confirmed by the user.
After the measurement has finished and the memory values display, the
backlight remains on for about 10 seconds.
...................................
Turn to next
the average value of the
latest 3 measurements
22
the "SET" button for 4-6 seconds;
" or " ".
24