Proper Measurement Method; Take A Measurement - Lumiscope 1146 Manual De Instrucciones

Adjusting Settings
7
To set user
Press the "SET" button and the user symbol will appear when turned off or
the display function of the date and time is ON. Then press the "MEM" button
to change the current user.
Finally, press the " " button to confirm user and turn off.
START
STOP
You can stop the setting anytime when you press the "
save the current setting and turn the unit off.
If select to display the date and time, the current date and time will
display when the unit is turned off.

Take a Measurement

1
Press the " " button.
START
STOP
All display symbols appear. If the positioning system is turned on, and the unit
detects your arm is not in the proper position, it will sound the alarm to remind
you to raise or lower the cuff. The arrowhead will then flash, then the
arrowhead symbol will disappear, and the "
Bi...Bi...Bi
Too Iow
Bi Bi Bi Bi
High
" button to
START
STOP
17
" symbol will display.
Bi--Bi Bi Bi
Bi Bi Bi Bi
Iow
Bi...Bi...Bi
Too High
19
1
Remove all clothes from your
arm, allowing the cuff to fit
directly on the skin.
3
Sit in a chair with your feet flat on the floor.
2
When your arm is in the proper position and the heartbeat
symbol disappears, the unit will automatically begin to
inflate and measure.
The hearbeat symbol "
Starts to inflate
OK
3
The blood pressure and pulse rate are displayed when
the measurement is complete.
The cuff deflates automatically and
the measurement results are stored
in memory with date and time.
The " " symbol will display
if irregular heartbeat is detected.

Proper Measurement Method

2
Wrap the cuff tightly around
your wrist by using the
hook and loop strip.
18
Take a Measurement
" flashes once a pulse is detected.
Inflating Heartbeat appears Continues Inflating
20
Measurement Complete
OR