Intended Use; Assembly & Operation - Worx HYDROSHOT WG620E Manual Original

Extension lance
/
(WA4012)
Pivoting quick
connect adapter /
(WA4039)
Rotary cleaning
/
brush (WA4042)
Adjustable power
scrubber (WA1820 /
/ WA1821)
Short lance
/
(WA4013)
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.

INTENDED USE

This tool is intended for cleaning and watering.
ASSEMBLY & OPERATION
ACTION
BEFORE OPERATION
Installing the battery pack
Removing the battery pack
Checking the battery condition
NOTE: Fig. A3 only applies for the battery
pack with battery indicator light.
Charging the battery pack
More details can be found in charger's
manual
ASSEMBLY
Attaching pressure cleaning lance to the
power nozzle
NOTE: When attaching, align the two
projections on the lance with the grooves of
the power nozzle as shown in Fig. B.
Attaching the multi-spray nozzle
NOTE: when attaching, rotate the nozzle
left and right to make sure the nozzle fully
seated into position and gently pulling it to
make sure it is locked into position securely.
2 in 1: Portable Power Cleaner/Water Sprayer
/ / / /
/ / / /
/ / / /
/ / / /
/ / / 1
FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. A4
See Fig. B
See Fig. C
Attaching the hose to the power nozzle
NOTE: After the hose is attached, check the
connection by gently pulling upon the hose.
It should not be pulled off.
Attaching your own water hose (optional)
1. Remove the hose adapter
2. Attach the home garden hose with
suitable connectors
NOTE: Besides the hose supplied, you can
also connect the power nozzle to your own
water hose with suitable connectors.
NOTE: Check whether the filter screen
is missing before retightening the hose
adapter. When retightening the quick hose
adapter, please tighten securely. Otherwise,
it may not draw any water for proper
operation.
OPERATION
WARNING: The supplied battery is
not waterproof. To avoid risk of
battery failure, protect the battery from
water exposure during use. Store the
tool and battery in a dry place after use.
Start
NOTE: At the first use or after long-term
storage, it is recommended to attach
the tap or inject water into the hose
adapter with the machine turned on, so
as to empty the air. Do not start working
until the water goes up along the hose
and sprays out.
Selecting the nozzle pattern
NOTE: Choose a suitable nozzle pattern
according to your work. Spray
0 0 0
patterns 0 , 15 , 25 and 40
for cleaning, and the spray
pattern with the symbol
for watering.
WARNING: Do not shift the nozzle
pattern when the tool is powered on.
Cleaning
WARNING: Do not connect the
machine to water supplies that are
dirty, rusty, muddy, or corrosive.
(Including window cleaning liquids,
plant foods, or fertilizers etc.)
NOTE: For proper maintenance after using
with sea water, the product should be rinsed
by fresh water.
Watering
See Fig. D1,
D2
See Fig. E1,
E2, E3
See Fig.
F1,F2,F3
0
are applicable
See Fig. G
is best suitable
See Fig. H, I
See Fig. J
EN
15