Installation Instructions - PNI AVR M500VA Manual De Usuario

Installation instructions

• Turn off the device to be powered by the stabilizer (eg
computer, fan, etc.), unplug the power cord from the wall
outlet, and insert it into the Schuko sockets on the stabilizer.
Note: The starting power of the connected device must not exceed
the rated power of the stabilizer.
• Insert the stabilizer power cord into the wall outlet.
• Press the DELAY button to activate the Time-delay
function at 180 seconds. Details on page 4.
• After the green LED lights up, turn on the connected device
(computer, fan, etc.)
Maintenance
To ensure optimal operation for a long period of time, follow the
instructions below:
• do not block the stabilizer vents
• Periodically clean the stabilizer housing
• Check the input and output cables if they are properly
connected and if they are in good condition
• Check that the stabilizer has no condensation on the
housing.
Troubleshooting
If you think that the stabilizer is not working properly, call a
specialist service center.
8 - User manual