Transport; Storage; Disposal; After-Sales/Service - AL-KO SOLO MT 130 Manual De Instrucciones

GB
Malfunction
Cutting blade gets hot.
Smoke development.
Branches are not cut off
cleanly. Branches often jam
in the cutting blade.
Motor running, but the cut-
ting blade does not move.
Appliance vibrates unusual-
ly.
Further malfunctions

9 TRANSPORT

Perform the following measures before transport-
ing the appliance:
1. Switch off the appliance.
2. Push protective cover onto the cutting blade.
3. Separate basic appliance, shaft extension (if
used) and attachment from one another.

10 STORAGE

Thoroughly clean the appliance after each use
and – if present – attach all covers. Store the ap-
pliance in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
■
Clean the cutting blade and spray with rust-
proofing oil.

13 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
16
Cause
No oil on the cutting blade.
■
Cutting blade is blunt.
■
Nicks in the cutting blade.
Cutting blade is blunt.
Sliding play of the cutting blade
is too large.
Appliance fault
Appliance fault
See "Multitool MT 130 – basic appliance" operating instructions.
■

11 DISPOSAL

12 AFTER-SALES/SERVICE

In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
KO Service Centre. These can be found on the
Internet at:
www.al-ko.com/service-contacts
The warranty becomes void in the case of:
■
■
■
Remedy
1. Switch off the appliance.
2. Clean and oil the cutting
blade.
Contact one of the manufactur-
er's service centres.
Contact one of the manufactur-
er's service centres.
Contact one of the manufactur-
er's service centres.
Contact one of the manufactur-
er's service centres.
Contact one of the manufactur-
er's service centres.
Thoroughly clean the appliance and store it in
a dry place.
■
Packaging, equipment and accesso-
ries are made from recyclable materi-
als, and must be disposed of accord-
ingly.
Unauthorised repair attempts
Unauthorised technical modifications
Non-intended use
Transport
443446_a