Xiaomi Robot Vacuum-Mop 2 Ultra Manual Del Usuario página 5

Installation
1. Remove the original dust compartment from the
vacuum-mop.
2. Install the auto-empty dust compartment.
7
3. Put away the original charging dock.
4. Install the auto-empty station.
Place the auto-empty station in an open area with a good Wi-Fi signal.
·
Use the cable holder and cable grooves to organize the power cord.
·
① Wrap any excess ② Insert the part of the
power cord into the power cord that is on the
cable holder. ground into the cable
grooves.
How to Use
Turning on and charging
Plug in the auto-empty station and turn it on. The indicator on the auto-
·
empty station will turn white.
Manually place the vacuum-mop onto the auto-empty station, the
·
vacuum-mop turns on automatically and starts to charge.
Once the vacuum-mop is fully charged, the indicator on the auto-empty
·
station will remain white for 10 minutes, and then go off.
Turn on the auto-
empty station
Notes:
· Push the switch to the mark of "I", the auto-empty station is turned on; push the switch
to "O", the auto-empty station is turned off.
· The auto-empty station cannot function if it is not plugged in or not turned on.
Start cleaning
Press the button , the vacuum-mop will leave from the auto-empty
station to start cleaning.
Notes:
· Before using this feature, make sure the auto-empty station is turned on and the
vacuum-mop is connected to it.
· To ensure the vacuum-mop can easily return to the auto-empty station after cleaning,
allow the vacuum-mop to start from the auto-empty station, and avoid moving the auto-
empty station during a cleaning task.
Empty the dust compartment
When the vacuum-mop has finished a cleaning task, it will return to
the auto-empty station to charge. The auto-empty station will then
automatically start to empty the dust compartment.
Notes:
· If the dust auto-empty feature is disabled in the app, the auto-empty station will not
automatically empty the dust compartment.
· If the auto-empty frequency is modified in the app, the auto-empty station will empty the
dust compartment according to the configured frequency.
· If the auto-empty station does not empty the dust compartment automatically, you can
press and hold the button on the auto-empty station for 2 seconds to make it start.
8