Device Description; Use; Initial Use - Beurer FB 65 Instrucciones De Uso

4. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
LED touch display
1
Splash protection
2
Fill level mark (max. 5.5 l)
3
Ambient lighting
4
Foot rest with massage nodules
5
Bubble bar
6
Massage roller attachments (6 pieces)
7
Motorised pedicure centre
8
Portable pedicure device
9
Brush attachment
10
Massage attachment
11
ON/OFF button
12

5. USE

Initial use

1. Remove the packaging, including the film protecting the display.
2. Check the complete scope of delivery (including packaging) for damage.
3. Before plugging the foot bath in, fill it with cold or warm water up to the fill level mark
high). The foot rest part must be completely submerged under water.
4. Place the foot bath on a firm and level surface.
5. Ensure that the mains cable does not pose a trip hazard.
6. Insert the mains plug into a suitable socket. The ON/OFF button
standby mode.
Using the foot bath
1. Sit in a comfortable position. Never use the foot bath standing up.
2. Place your feet in the foot bath. The rubber feet on the base of the device prevent the foot bath from
slipping.
3. Press the ON/OFF button
display shows the current water temperature. The foot bath is now ready for use.
19
4. The massage is especially effective if you move your feet back and forth over the massage roller attach-
ments in the foot rest.
7
13
14
15
16
17
18
19
20
21
22
23
24
to switch the foot bath on. The ON/OFF button
12
"Increase water temperature" /
"Switch water heating on" function button
"Decrease water temperature" /
"Switch water heating off" function button
"Vibration" function button
"Programs" function button
"Bubble" function button
"Ambient lighting" function button
Water temperature / timer time display
"Timer" function button
Cable outlet
Cord winder
Rubber feet
Storage / drying bag
12
16
(approx. 5 cm
3
starts to flash. The foot bath is in
lights up and stays lit; the
12