Twin Bio Luxury Compact Ne User Manual; Introduction; General Information; Scope Of Delivery - Kostrzewa Twin Bio Luxury Compact NE 8 Manual De Uso

1. Introduction | 2. Information | 3. Scope of delivery | 4. Design guidelines
60

1. Introduction

Twin Bio Luxury Compact NE boiler with automatic pellet feeding sets new
trends in utilizing biological fuel. The Twin Bio Luxury Compact NE boiler can,
without exaggeration, be called a 'heating system' , as this one device constitutes
the best quality, fully equipped and automated product. The planar boiler desi-
gn with water 'tongue pipes' allows for the optimal use of the device's heating
surface and does not expose the exchanger section to excessive thermal loads
while maintaining compact dimensions. Our company offers reliable, durable
and cost-effective solutions. The device has the capability to automatically burn
biomass in the form of pellets. The simple and intuitive operation of boiler/
boiler room control systems is also important to the user. The large graphic
display combined with the ergonomic and clear interface of the boiler control
system make our solutions easy to use.

2. General information

The operation manual is an integral part of the boiler and must be provided to
the user of this device. The device installation must comply with the manual,
relevant standards and good building practices. Boiler operation conforming
to the User Manual guarantees safe and failure free functioning and is a
precondition for the manufacturer's warranty coverage. The specifications may
change without notice.
KOSTRZEWA IS NOT LIABLE FOR ANY DAMAGE DUE TO INCORRECT
INSTALLATION OF THE PRODUCT OR FAILURE TO OBSERVE
THE CONDITIONS SPECIFIED IN THIS USER MANUAL.

3. Scope of delivery

The Twin Bio Luxury Compact NE boiler is provided on a wooden
1350x900 mm pallet including:
• boiler heat exchanger
• platinum Bio VG burner
• fuel feeder (flexible hose + chute bend + 2 pcs duct clamps)
• VG Lite automatics
• storage hopper type Compact (varnished elements + galvanized
elements)
• cleaning tool kit
• user manual
Leader in pellet boilers

4. Design guidelines

THE INSTALLATION AND ALL CONNECTIONS MUST COMPLY
WITH RELEVANT STANDARDS AND REGULATIONS.
a. Boiler location requirements
The distance of boiler walls and accessories from the room walls must guarantee
easy and failure free operation of the hot water boiler (boiler control system
operation, efficient manual fuel feeding to the storage hopper, repairs,
inspections etc.) Ensure sufficient space when planning and installing the boiler
and its accessories in the distance required to open all boiler doors, clean the
combustion chamber and the exchanger baffles.
The recommended installation space for the boiler and its accessories is shown
in the Figure 1.1. Boiler location in the boiler room - dimension diagram.
CAUTION! FLOOR UNDER THE BOILER AND THE HOPPER SHOULD
BE PROPERLY LEVELLED SIGNIFICANT DROP MAY CAUSE THE TANK
TO MOVE.
Table 1. Boiler room dimension data.
Boiler room dimensions
Marking
A1
B1
C1
H1
g
Twin Bio Luxury Compact NE v01 User Manual – EN 01.19
Unit
≥500mm
For models 8,10,12,16 ≥ 700mm
For models 24 ≥ 800mm
≥500mm
≥2000mm
≥ 50mm