PROZIS KYMO Manual Del Usuario página 7

Maintenance and cleaning
Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel
wool. They can damage the upper surface of the product!
Only use a clean, dry cloth for cleaning the product and never use any corrosive liquids. Use a
slightly damp cloth and a mild cleaning agent to remove any stubborn dirt.
Use glass cleaner to lightly moisten a soft, lint-free cloth and gently wipe the mouse's lens.
Make sure moisture does not enter the product while cleaning to prevent damage to the
product and related repairs.
Storage
When no longer using the product, store it in a dry environment, protected from dust and
direct sunlight.
If the product is not going to be used for a long period of time, take the batteries out.
Store your Mouse inside the original case provided.
INSTRUCTIONS
Mouse instructions:
1. Open the battery cover on the mouse and install the battery properly.
2. Please refer to the internal symbols on the mouse for the positive and negative poles. Before using the
battery, tear off the insulating film.
3. Remove the 2.4 GHz receiver from the mouse's battery compartment (USB receiver is plug and play)
4. Plug it into your computer's USB port. The first time you use it, the computer will install the USB driver
automatically. Wait about 15 ~ 60 seconds. The mouse can be used once the computer finds the receiver
device (please note that the USB driver software is automatically installed and ready to use).
EN
7