Preparing For Use; Tips For Use; Use; Manually Adjustable Sections - Auping Match 377 Manual De Instrucciones

All manuals and user guides at all-guides.com
'Click' the anchors into the mesh at the posi-
tions indicated (see fig. 6).
Make sure that the anchors are not directly
above a cross bar.

3.4 Preparing for use

Check that the mesh base can move freely.
Only adjust the mesh base while it is in a hori-
zontal position, securely fixed to the support-
ing legs, or to the supports provided within the
bed surround.
Check that the mattress is attached to the
mesh base properly.
Insert the plug into the wall socket.

3.5 Tips for use

A new mattress has a certain amount of rigidity,
which will disappear within a few days.
Consequently, your mattress will not optimally
follow the contours of the mesh base when it
is initially adjusted. We therefore recommend
that you lie down on the mattress while adjusting
the positions for the first time.
_01PPD_3503 BinnenW.pdf - pag.15

4. Use

4.1 Manually adjustable sections (type 379
only)
Head support
The head support has five adjustable positions.
Carefully pull on the handle until the desired
position is reached.
To put the head support into a lower position
you must first pull it up as far as it will go and
then lower it again.
fig. 6

4.2 Electrically adjustable sections

The handset is used to adjust the electrically
adjustable sections (see fig. 7).
Type 377/379
1. Raise back section
2. Lower back section
3. Raise foot end
4. Lower foot end
5. Raise back section and foot end
6. Lower back section and foot end
Press one of the 'up' or 'down' buttons, hold-
ing it down until the desired position is
reached. Only one button can be operated at
a time.
LET OP !!! Lage resolutie!
fig. 7
GB5
June 12, 2008