Maintenance And Care - brennenstuhl Power Jet-Light ELP 55 Instrucciones De Uso

060910 Jet Light ELP 55:032210 Arbeitsleuchte ELP 55
Power Jet-Light ELP 55
Operation
Setting up the lamp
Place the lamp on a dry and even surface. Only use the lamp with the handle opened.
The lamp can be switched on and off via the switch which is located on the backside.
The lamp can be mounted onto a suitable tripod through the holes on the bracket
(fixings not included!). Ensure that the tripod is sufficiently stable.
Replacing the illuminant
• Warning! Always disconnect the power plug from the mains outlet prior to performing
any kind of work on the lamp. Disregard can pose the risk of accident and / or injury!
• Warning! Let the lamp cool down completely. Disregard can pose the risk of injury.
• Use a clean, lint-free cloth to change the illuminant.
• Only use illuminants according to the specifications mentioned in the section
»Technical Data«.
• Place the work lamp with the backside facing downward.
• Remove the rubber lip by pressing it downward.
• Use a suitable Phillips screwdriver to remove the 6 safety screws from the housing.
• Remove the lamp cover.
• Carefully remove the illuminant.
• Gently push the new illuminant into the lamp socket.
• Reattach the lamp cover to the housing and fasten it with the 6 safety screws.
• Slide the rubber lip back over the lamp cover. Ensure that the rubber lip locks the lamp
cover and housing properly.
Your lamp is ready for operation.

Maintenance and care

Important! The work lamp contains no parts that have to be serviced by the user.
Warning! Always disconnect the power plug from the mains prior to performing any kind
of work on the lamp.
Disregard can pose the risk of accident and / or injury.
Caution! For safety reasons the lamp must not be cleaned with water or other liquids.
Use only a clean, lint-free cloth to clean the lamp.
Do not use solvents, gasoline, etc., as this would damage the lamp.
Disposal
Do not dispose of electrical appliances in the regular household waste!
In accordance with European Directive 2002 / 96 / EG about the disposal of
electronic and electrical appliances and the realization under national law, electric
tools must be collected separately and have to be recycled in a nonpolluting manner.
Contact your municipal office for further information about recycling centers for your
disused appliance.
8
06.08.10 7:50 Uhr
Operating Instructions
Seite 8