Worx Professional WU434 Manual De Instrucciones página 12

Symbols
To reduce the risk of injury, user must read instruction manual.
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
All manuals and user guides at all-guides.com
1
10
Operating instructions
Note: Before using the tool, read the instruction book
carefully.
iNTeNDeD USe
The machine is intended for lengthways and crossways cutting
of wood with straight cutting lines as well as bevel angles to 56°
while resting firmly on the work piece.
CHANGiNG THe SAW blADe (See Fig.A)
• before any work on the machine itself, unplug the saw.
• Wear protective gloves when mounting the saw blade.
Danger of injury when touching the saw blade.
• only use saw blades that correspond with the characteristic
data given in the operating instructions.
• Do not under any circumstances use grinding discs as the
cutting tool.
For changing the cutting tool, it is best to place the machine on the
face side of the motor housing.
reMoviNG
Press the spindle lock button (3) and keep it depressed.
• The spindle lock button (3) may be actuated only when the saw
blade is at a standstill.
Loosen the blade bolt (18) with the spanner wrench (19). Remove
the outer flange (17). Tilt back the lower blade guard (9) and hold it
firmly with the lower guard lever (11). Remove the saw blade (16).
MoUNTiNG
Clean the saw blade and all the clamping parts to be assembled.
Tilt back the lower blade guard (9) and hold it firmly with the lower