Samsung RF22 Serie Manual Del Usuario página 3

Ocultar thumbs Ver también para RF22 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire.
• Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
• Do not bend the power cord excessively or
place heavy articles on it.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
- When moving the refrigerator, be careful not to
roll over or damage the power cord
- This may result in an electric shock or fire.
• Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause a short-circuit,
fire and/or electric shock.
• Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause
an explosion or fire.
• Do not install this appliance near a heater,
inflammable material.
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
• Do not install this appliance in a location where
gas may leak.
- This may result in an electric shock or fire.
• This appliance must be properly grounded.
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
- You must ground the refrigerator to prevent
any power leakages or electric shocks caused
by current leakage from the refrigerator.
- This may result in an electric shock, fire,
explosion, or problems with the product.
- Never plug the power cord into a socket that
is not grounded correctly and make sure that it
is in accordance with local and national codes.
This appliance should be positioned in such a
way that it is accessible to the power plug.
- Failing to do so may result in an electric shock
or fire due to electric leakage.
• This refrigerator must be properly
installed and located in accordance
with the manual before it is used.
• Connect the power plug in the proper position
with the cord hanging down.
DA68-02657A-12.indb 3
All manuals and user guides at all-guides.com
- If you connect the power plug upside down,
• When moving the refrigerator, be careful not to
- This constitutes a fire hazard.
• Make sure that the power plug is not
• Keep the packing materials out of reach of
-
• The appliance must be positioned so that the
• You need to remove all the protective plastic
• When disposing of this or other refrigerator/s,
- If trapped inside, the child may become injury
- Always make sure that you have grounded the
• Never use gas pipes, telephone lines or other
- Improper use of the grounding plug can result
• If the products is equipped with the LED
- Please contact your service agent.
• Use only the LED Lamps provided by
the wire can get cut off and cause a fire or
electric shock.
roll over or damage the power cord.
squashed or damaged by the back of the
refrigerator.
children.
There is a risk of death from suffocation if a child
puts the packing materials on his or her head.
plug is accessible after installation.
film before you initially plug the product in.
remove the door/door seals, door latch so that
children or animals cannot become trapped
inside. Children should be supervised to
ensure that they do not enter and play with the
appliance.
and suffocate to death.
• The refrigerator must be safely
grounded.
refrigerator before attempting to investigate
or repair any part of the appliance. Power
leakages can cause severe electric shock.
potential lightning attractors as an electrical
ground.
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-120
V, 10 A, or more. If a grounding adapter is
used, make sure the receptacle box is fully
grounded.
Lamp, do not disassemble Lamp Cover and
LED Lamp by yourself.
manufacturer or service agent.
• If the power cord is damaged,
have it replaced immediately by the
Safety information _03
2018. 10. 8. 오후 5:45
Tabla de contenido
loading

Tabla de contenido