Getting Started; Battery Operation; Mains Operation - Hama 00186434 Instrucciones De Uso

Ocultar thumbs Ver también para 00186434:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
• Route all cables so that there is no risk of tripping.
• Do not bend or crush the cable.
• Only use the article under moderate climatic
conditions.
• The battery is integrated and cannot be removed.
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
• The product and the measurements it displays are
intended for use in the home, offer no absolute
accuracy and do not satisfy the requirements needed
and/or prescribed in professional applications.
• This product and its measured values may not be
used for professional applications or to inform
the public.

5. Getting started

The product can be used both in battery and mains
operation. For battery operation, fully charge the
product once before rst use.

5.1 Battery operation

Warning – rechargeable battery
• Only use suitable charging devices or USB
connections to charge the product.
• Do not use defective chargers or USB ports and
do not attempt to repair them.
Warning – rechargeable battery
• Do not overcharge the product or allow the
battery to completely discharge.
• Avoid storing, charging and using in extreme
temperatures and at extremely low atmospheric
pressures (such as at high altitudes).
• Charge regularly (at least quarterly) during
periods of prolonged storage.

5.2 Mains operation

Connect the supplied micro-USB charging cable to the
micro-USB port (D) on the product. Connect the free
plug on the micro-USB charging cable to a suitable USB
charger. To do this, consult the operating instructions
for the USB charger you are using.
• The battery indicator (3) indicates the charge level by
means of the bars.
• When fully charged, the charging process can be
terminated. Disconnect the product from the mains.
Note – charging process
• A complete charging cycle takes about 2 hours.
• The product's battery can be charged both when
it is switched on and off.
• When fully charged, the maximum operating time
is approx. 180 to 210 minutes.
4
Tabla de contenido
loading

Tabla de contenido