Clock Setting - Foster S1000 Manual De Instrucciones

2
Open the door; fix the oven to the cabinet with SCREW at the INSTALLATION HOLE
of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER to the INSTALLATION HOLE.
Operation Instructions

1. Clock Setting

When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " CLOCK ", the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " CLOCK ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " CLOCK " to finish clock setting. ":" will flash, and the time will light.
Note:
1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "STOP/CLEAR ", the oven will go back to
the previous status automatically.
2. Microwave Cooking.
Press " MICRO./GRILL/COMBI. " the LED will display "P100. Press " MICRO./GRILL/COMBI. "
for times or turn "
will display for each added press. Then press" START " to confirm, and turn
" " to set cooking time from 0:05 to 95:00.Press " START " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the
oven as the following steps.
1) Press " MICRO./GRILL/COMBI. " once, the screen display "P100".
2) Press " MICRO./GRILL/COMBI. " once again or turn "
3) Press " START " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
" to choose the power you want, and "P100", "P80" "P50", "P30" or "P10"
" to choose 80% microwave power.
25
EN